I'm hoping one of you has the bandwidth to help me solve a problem. There are two KeypadLincs I am having great difficulty scanning (link table), and I feel I should really be able to... I have (among many), 2 KPLs (i1) and an Insteon Micro Dimmer (Dual Band). They are all on the same circuit (which used to be a three way switch). I can contact the Micro Dimmer without issue, but these KPLs I cannot. If it was a signal issue, I would expect the adjacent dual-band micro-dimmer to relay the message ... but the message does not get through. I believe I once was able to reach these KPLs from my PLM, I don't think I linked them manually.
I am inclined to move the KPLs to another location in order to program them (assuming the problem is related to the location), but my pride makes me want to find a programmatic solution. (Also, the location may not be the issue!)