Insteon Question

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Insteon Question

Garry Doucette
Hi Guys

I bought myself a Pi and decided to rebuild my Misterhouse install from
scratch including my Insteon setup of about 25 devices. It's been years
since I set up my original system so I'm doing a lot up brushing up.

I've encountered an interesting situation already defining a simple scene.

I've started with the two devices in my office, ceiling lights
controlled by a Switchlinc  and a desk lamp connected to a Lamplinc.

My items.mht is set thus:

#PLM
INSTEON_PLM, PLM

INSTEON_SWITCHLINC,   1F.C9.A0,    Office_Ceiling_Light, Office
INSTEON_LAMPLINC,   05.CA.FD,    Office_Desk_Light, Office

INSTEON_ICONTROLLER, A0, Office_Lights, Office
SCENE_MEMBER,   Office_Ceiling_Light, Office_Lights, 100%
SCENE_MEMBER,   Office_Desk_Light, Office_Lights, 100%

I can control each individual device as expected, but when I try to turn
the scene on and off only the desk lamp responds.

The web interface displays the state of each device as you would expect
after clicking the Office_Lights scene button on and off. However the
ceiling lights stay ON regardless of setting the scene on or off.

This is what the log give me when I turn the scene off.

10/28/16 05:58:38 PM [Insteon_PLM] DEBUG2: Sending obj=$Office_Lights;
command=off; extra=00 incurred delay of 0.00 seconds; starting hop-count: 0
10/28/16 05:58:38 PM [Insteon_PLM] DEBUG3: Sending  PLM raw data: 0261a01300
10/28/16 05:58:38 PM [Insteon::BaseObject] $Office_Lights::set(off, web
[192.168.1.101])
10/28/16 05:58:38 PM [Insteon_PLM] DEBUG3: Received PLM raw data:
0261a0130006
10/28/16 05:58:38 PM [Insteon_PLM] DEBUG3: Processing PLM raw data:
0261a0130006
10/28/16 05:58:38 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge:
obj=$Office_Lights; command=off; extra=00
10/28/16 05:58:39 PM [Insteon_PLM] DEBUG3: Received PLM raw data:
025005cafe2ff7a66613a0
10/28/16 05:58:39 PM [Insteon_PLM] DEBUG3: Processing PLM raw data:
025005cafe2ff7a66613a0
10/28/16 05:58:39 PM [Insteon::BaseInterface] DEBUG3: Message received
with 1 hops left, delaying next transmit by 150 milliseconds to avoid
collisions.
10/28/16 05:58:39 PM [Insteon::BaseInterface] DEBUG3: PLM
command:insteon_received; Device command:off; type:cleanup; group:
10/28/16 05:58:39 PM [Insteon::BaseInterface] DEBUG3: Cleanup message
received for scene $Office_Lights from $Office_Desk_Light
10/28/16 05:58:39 PM [Insteon_PLM] DEBUG3: Received PLM raw data:
02580602501fc9a92ff7a66113a0
10/28/16 05:58:39 PM [Insteon_PLM] DEBUG3: Processing PLM raw data:
02580602501fc9a92ff7a66113a0
10/28/16 05:58:39 PM [Insteon_PLM] Received all-link cleanup success:
obj=$Office_Lights; command=off; extra=00
10/28/16 05:58:39 PM [Insteon_PLM] DEBUG3: Processing PLM raw data:
02501fc9a92ff7a66113a0
10/28/16 05:58:39 PM [Insteon::BaseInterface] DEBUG3: PLM
command:insteon_received; Device command:off; type:cleanup; group:
10/28/16 05:58:39 PM [Insteon::BaseInterface] DEBUG3: received cleanup
message responding to PLM controller group: $Office_Lights. Ignoring as
this has already been processed

This is what I get when I turn the scene on.

10/28/16 05:59:11 PM [Insteon_PLM] DEBUG2: Sending obj=$Office_Lights;
command=on; extra=00 incurred delay of 0.00 seconds; starting hop-count: 0
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Sending  PLM raw data: 0261a01100
10/28/16 05:59:11 PM [Insteon::BaseObject] $Office_Lights::set(on, web
[192.168.1.101])
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Received PLM raw data:
0261a0110006
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Processing PLM raw data:
0261a0110006
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge:
obj=$Office_Lights; command=on; extra=00
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Received PLM raw data:
025005cafe2ff7a66111a0
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Processing PLM raw data:
025005cafe2ff7a66111a0
10/28/16 05:59:11 PM [Insteon::BaseInterface] DEBUG3: PLM
command:insteon_received; Device command:on; type:cleanup; group:
10/28/16 05:59:11 PM [Insteon::BaseInterface] DEBUG3: Cleanup message
received for scene $Office_Lights from $Office_Desk_Light
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Received PLM raw data:
02580602501fc9a92f
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Processing PLM raw data:
02580602501fc9a92f
10/28/16 05:59:11 PM [Insteon_PLM] Received all-link cleanup success:
obj=$Office_Lights; command=on; extra=00
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Processing PLM raw data:
02501fc9a92f
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Saving data fragment:
02501fc9a92f
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Received PLM raw data: f7a66111a0
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Prepending prior data
fragment: 02501fc9a92f
10/28/16 05:59:11 PM [Insteon_PLM] DEBUG3: Processing PLM raw data:
02501fc9a92ff7a66111a0
10/28/16 05:59:11 PM [Insteon::BaseInterface] DEBUG3: PLM
command:insteon_received; Device command:on; type:cleanup; group:
10/28/16 05:59:11 PM [Insteon::BaseInterface] DEBUG3: received cleanup
message responding to PLM controller group: $Office_Lights. Ignoring as
this has already been processed

Any idea what I'm missing or why this might be happening.

Thanks!

Garry






------------------------------------------------------------------------------
The Command Line: Reinvented for Modern Developers
Did the resurgence of CLI tooling catch you by surprise?
Reconnect with the command line and become more productive.
Learn the new .NET and ASP.NET CLI. Get your free copy!
http://sdm.link/telerik
________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users